Low built, compact, narrow width trolley fabricated from heavy duty angles and steel plate structure is supported by three wheels (two guide wheels turning 3600 and one heavy duty tilting wheel fitted in centre of trolley). All the three wheels are made of UHMW material (Special synthetic material) and fitted with bearings.

Tilting wheel is in centre of trolley has been attached to a specially designed mechanism which tilts the wheel vertically to give excess to a rounded pan so as to go underneath of cloth roll. Simultaneously supporting legs are also lowered and rollers of the legs rest on floor to maintain the balance of trolley and load of cloth roll.

Rounded shape pan is fitted to lifting arms and shaft of hydraulic cylinder.

Back end of the trolley is fitted with hydraulic unit and hand pump which is connected to one single hydraulic cylinder in centre. Trolley is fitted with fixed handle bars in centre at convenient height to push and pull for movements.

All the UHMW wheels are fitted with a pair of ball bearings. All the moving parts under load are also fitted with suitable sizes bearings. In all there are 14 bearings fitted in trolley which makes easy and comfortable movements.


WORKING OPERATIONS

The operator operates the lever of the hydraulic pump at rear side of trolley which lowers or raises the cloth roll pan. As the pan is lowered to take up the cloth roll the narrow legs are also lowered simultaneously and the guide rolls are resting on floor. When the cloth roll is loaded on the pan trolley can be pull back and raised. The tilting wheel also takes vertical position simultaneously and the trolley can be moved in the alleys.