Two
steel fork shaped lifting arms are
fitted on lifting shaft and carriages
on both sides which are movable
and adjustable as per main barrel
length and can be raised up or lowered
by hydraulic lifting cylinder and
chain arrangement.
Special provision to accommodate
short and wide working width of
top beams is provided by shortening
and lengthening collapsible device
(telescopic type) on the trolley
which is operated by manual crank
turning provided at the side of
the trolley.
One end of the machine is fitted
with hydraulic unit & hand pump
which is connected to two hydraulic
cylinders on both side of trolley.
All the four UHMW wheels are fitted
with a pair of ball bearings. All
the moving parts which are under
load are fitted with suitable sizes
of bearings. In all there are forty
four nos. of bearings fitted in
the trolley which makes very easy
and comfortable movements.
WORKING OPERATIONS
The operator operate the lever of
the hydraulic pump at rear side
of trolley which lowers or raises
the lifting arms to take up or place
the beam on floor or on loom. The
trolley can be pulled by one operator
on either side of handle bars connected
to trolley.
|
