Hydraulic Trolley
< Home
Back
Twin Beam Trolley With Harness Mounting Device - BT 103-B
BT -103 - B- TWIN BEAM TROLLEY WITH HARNESS
HARNESS MOUNTING DEVICE - HYDRAULIC
Suitable for Two (Twin) Bottom Beam and harness frames transporting, Loading / Unloading in loom shed and beaming area. Capacity up to 2000 Kgs and beam flange diameter up to 1000 mm and Harness frames up to 12 Nos.
CONSTRUCTION OF TROLLEY :
Low built, robust, fabricated from heavy duty steel angles and 8 mm thick plate structure is supported by six heavy duty UHMW material wheels on four corners of trolley. Two are guide wheels turning 3600 and other two are in pair works as steered wheels. Both the pairs of wheel have been fitted in specially designed mechanism which maintains the level of trolley even on rough and uneven surface of floor.
Both the pairs are self aligning by the unique design due to the facility of turning 3600 as well as vertical angle of wheel to suit floor level.

Harness mounting device is fabricated on both sides of trolley. Two solid vertical rectangle pillars perfectly in machine and fitted with two carriages which is operated by two separate hydraulic cylinders. Harness mounting device has folding and expanding levers hold the frames to load and unload on loom. Harness mounting device is strengthen by extra shaft all along the trolley and connected with sprockets and chains on both side for easy and smooth lifting of carriages.

Two solid steel fork shaped lifting arms are fitted on hexagonal lifting shaft which are movable and adjustable as per beam barrel length and can be firmly locked once adjusted.

One end of the machine is fitted with hydraulic unit & hand pump which is connected to two hydraulic cylinders on both side of trolley. Both side handle bars are provided with swivel block & bearings for turning, pushing and pulling the trolley for transport.

All the six UHMW wheels are fitted with a pair of ball bearings. All the moving parts which are under load are fitted with suitable sizes of bearings. In all there are fifty two nos. of bearings fitted in the trolley which makes very easy and comfortable movements.

WORKING OPERATIONS

The operator operates the lever of the hydraulic pump at rear side of trolley which lowers or rises the lifting arms to take up or place the beam on floor or on loom. The trolley can be pulled by one operator on either side of handle bars connected to swiveled bearing and assembly which steers the wheels in the direction.
TECHNICAL SPECIFICATIONS :

CARRYING CAPACITY : 1000 - 2000 Kgs.
BEAM FLANGE DIA : 800 - 1000 mm [ 32” – 40” ]
BEAM BARREL DIA : 100 - 350 mm [ 4”-14” ]
WIDTH OF TROLLEY : 1000 mm [ 40” ]
LENGTH OF TROLLEY : AS PER LOOM LENGTH
TROLLEY WHEELS : 6 NOS. [ 3+3 ] OF UHMW MATERIAL
4 WHEELS ARE SELF ALIGNED
HYDRAULIC CYLINDERS : FOUR
HYDRAULIC UNIT : ONE
NO. OF BEARINGS : 48
NO. OF HARNESS FRAMES : 12

SPECIFICATIONS REQUIRED IN CASE OF ORDERS

Loom Width
mm
Weight of full beam
kgs.
Dia. of beam flange
mm
Dia. of beam barrel
mm
Length of beam barrel
mm
Size of beam alley
mm
Size of side alley
mm
Type of floor
 
Type of loom
 
E-mail: bt@allwintrolley.com | allwinind@yahoo.com
Designed & Developed By: Net Services India