Heavy Beam Trolley, Beam Trolley, Trolley, Manufacturer, Exporter, Sellar, India
Hydraulic Trolley
< Home
Heavy Beam Trolley, Beam Trolley, Trolley, Manufacturer, Exporter, Sellar, India
Back
Flexy Beam Trolley
BT -102 FLEXI BEAM TROLLEY – FOR NARROW ALLEYS
Suitable for Cloth Roll or warp beam transport and lifting from loom or cloth inspection area. The trolley is specially suitable for small weaver’s alley or beam alley. Carrying Capacity is up to 1200 Kgs. And beam dia up to 800 mm.
CONSTRUCTION OF TROLLEY :
Low built, compact, narrow width trolley fabricated from heavy duty angles and steel plate structure is supported by four wheels (two guide wheels turning 3600 at ends and one heavy duty tilting wheel fitted in front centre of trolley the fourth one fitted in backside but in centre of trolley turning 900 as the driving direction of trolley changes).All the four wheels are made of UHMW material (Special Synthetic Material) and fitted with bearings.
Tilting wheel is in centre of trolley has been attached to a specially designed mechanism which tilts the wheel vertically to give excess to a rounded pan so as to go underneath of cloth roll. Simultaneously supporting legs are also lowered and rollers of the legs rest on floor to maintain the balance of trolley and load of cloth roll.

Two fork shaped lifting arms are fitted on the main lifting shaft is operated by hydraulic cylinders on both sides.

Back end of the trolley is fitted with hydraulic unit and hand pump which is connected to one single hydraulic cylinder in centre. Trolley is fitted with fixed handle bars in centre at convenient height to push and pull for movements.

All the UHMW wheels are fitted with a pair of ball bearings. All the moving parts under load are also fitted with suitable sizes bearings. In all there are 18 bearings fitted in trolley which makes easy and comfortable movements.

WORKING OPERATIONS

The operator operates the lever of the hydraulic pump at rear side of trolley which lowers or raises the lifting arms. As the arm are lowered to take up the cloth roll or warp beam the narrow legs are also lowered simultaneously and the guide rollers are resting on floor. When the cloth roll or beam is loaded on the lifting arms trolley can be pulled back and raised. The tilting wheel also takes vertical position simultaneously and the trolley can be moved in the alleys.

TECHNICAL SPECIFICATIONS :

CARRYING CAPACITY : UP TO 1200Kgs.
CLOTH ROLL DIA. : UP TO 800 MM
DIMENSIONS OF TROLLEY : 900 W X 1950 L X 1000 H (MM)
TROLLEY WHEELS : 4 NOS. ( TWO GUIDE WHEELS, ONE TILTING WHEEL AND
ONE SUPPORT WHEEL)
4 NO. ROLLERS OF SUPPORTING LEGS.
HYDRAULIC CYLINDERS : TWO
HYDRAULIC UNIT : ONE
NO. OF BEARINGS : 18

SPECIFICATIONS REQUIRED IN CASE OF ORDERS

Loom Width
mm
Weight of full cloth roll
kgs.
Weight of full beam
kgs.
Dia. of full cloth roll
mm
Dia of full beam
mm
Type of loom
Size of weaver’s all
mm
Size of beam alley
mm
Length of full cloth roll
mm
Type of floor
 
E-mail: bt@allwintrolley.com | allwinind@yahoo.com
Designed & Developed By: Net Services India