Low built, robust, fabricated from heavy duty steel angles and 8 mm thick plate structure is supported by six heavy duty UHMW material wheels on four corners of trolley. Two are guide wheels turning 3600 and other two are in pair works as steered wheels. Both the pairs of wheel have been fitted in specially designed mechanism which maintains the level of trolley even on rough and uneven surface of floor.

Both the pairs are self aligning by the unique design due to the facility of turning 3600 as well as vertical angle of wheel to suit floor level.

Two solid steel fork shaped lifting arms are fitted on hexagonal lifting shaft which are movable and adjustable as per beam barrel length and can be firmly locked once adjusted.

One end of the machine is fitted with hydraulic unit & hand pump which is connected to two hydraulic cylinders on both side of trolley. Both side handle bars are provided with swivel block & bearings for turning, pushing and pulling the trolley for transport.

All the six UHMW wheels are fitted with a pair of ball bearings. All the moving parts which are under load are fitted with suitable sizes of bearings. In all there are twenty nos. of bearings fitted in the trolley which makes very easy and comfortable movements.

WORKING OPERATIONS

The operator operate the lever of the hydraulic pump at rear side of trolley which lowers or rises the lifting arms to take up or place the beam on floor or on loom. The trolley can be pulled by one operator on either side of handle bars connected to swiveled bearing and assembly which steers the wheels in the direction.